
Bathroom Waterproofing in Cairns
Waterproofing to AS 3740 by licensed waterproofers, with a certificate — done properly as part of your bathroom renovation.
Why waterproofing is the most important part of a bathroom
You never see the waterproofing in a finished bathroom. It's a membrane that sits under the tiles, across the floor, up the walls in the shower and around every penetration and drain. When it's done well, nobody thinks about it again. When it's done badly, water slowly finds its way into the slab, the timber frame or the room next door — often for months before anyone notices.
That's why we treat waterproofing as the backbone of every bathroom renovation. Tiles, tapware and vanities can be changed later. A failed membrane means stripping the room back to the frame and starting again.
Waterproofing to AS 3740, by licensed waterproofers
Every bathroom, ensuite and shower we renovate is waterproofed to Australian Standard AS 3740 by a licensed waterproofer. The standard covers which areas must be waterproofed, how high the membrane goes, how it's treated at junctions, drains and hobs, and how floors fall to the waste. John Bourjon (QBCC 15188942) manages the sequence so the membrane is applied over a sound, clean substrate and given proper curing time before any tiling starts.
When the work is complete you receive a waterproofing certificate. Keep it with your house paperwork — buyers, building inspectors and insurers may ask for it.
Signs your bathroom waterproofing has failed
- A musty smell that hangs around even when the room is clean
- Mould that keeps coming back on grout, silicone or the bottom of walls
- Loose, cracked or drummy tiles, especially in and around the shower
- Grout that keeps cracking or washing out
- Swelling or flaking paint on skirting boards, door frames or vanity bases
- Water stains, damp carpet or bubbling paint in the room next door, or on the ceiling below
If you're seeing a few of these, the problem is usually under the tiles rather than on the surface. Our shower replacement and leaking shower page explains what's involved in fixing it properly.
Why waterproofing matters even more in the tropics
A bathroom in Cairns gets very little chance to dry out. According to the Cairns Bathroom Report 2026, Cairns' average 9am humidity is 70% or higher in 9 months of the year (December to August), and rain of 1 mm or more falls on about 120 days a year — roughly one day in three. Any moisture that gets past the tiles stays there, feeding mould and rot behind the walls.
We back up the membrane with the other things that keep a tropical bathroom dry: an exhaust fan ducted outside, good falls to the drain, mould-resistant grout and sealants, and windows or louvres where the room allows. Membranes also need time to cure, which is slower in humid air, so we build that into the program rather than rushing the tiler in.
What failed waterproofing can cost
The report draws on Queensland Building and Construction Commission (QBCC) data showing that waterproofing defects consistently rank among the top ten most common defective work complaints to the QBCC. Under the Queensland Home Warranty Scheme, residential bathroom claims finalised in 2024–25 averaged almost $25,000 to fix.
In other words, fixing a bathroom that wasn't waterproofed properly can cost as much as building it right in the first place. Our full bathroom renovations start from $25,000 — see the bathroom renovation cost in Cairns guide for what's included.
Waterproofing as part of a full renovation
Waterproofing can't be done properly over the top of existing tiles. We carry it out as part of a complete renovation: strip out, repair or replace the substrate, rough-in plumbing, set the floor falls, apply the membrane, then tile and fit off. That's how we renovate every main bathroom and ensuite, and it's why we pair the membrane with careful bathroom tiling using the right adhesives and grout for wet areas.
Questions to ask any bathroom builder
- Is the waterproofer licensed, and will I get a waterproofing certificate?
- Will the work meet AS 3740?
- How long will the membrane cure before tiling starts?
- How is the shower floor falling to the drain, and what type of drain are you using?
- Is the exhaust fan ducted to the outside?
We're happy to answer all of these at your free consultation.
Related services & guides
Frequently asked questions
What standard should bathroom waterproofing meet in Queensland?
Waterproofing in a Queensland bathroom should be done to Australian Standard AS 3740 by a licensed waterproofer. We waterproof every bathroom we renovate to AS 3740 and provide a waterproofing certificate when the work is done.
Do you offer waterproofing on its own?
We waterproof as part of a full bathroom, ensuite or shower renovation, where the old tiles and membrane are stripped and the room is rebuilt properly. That's the only way to waterproof correctly — the membrane sits under the tiles, so it can't be added or fixed from the surface.
How do I know if my bathroom waterproofing has failed?
Common signs are a musty smell that won't go away, mould returning after cleaning, loose or drummy tiles, cracked or missing grout, swelling skirting or door frames, and water stains or damp patches in the room next door or the ceiling below.
Will I get a waterproofing certificate?
Yes. Every bathroom we renovate is waterproofed by a licensed waterproofer to AS 3740, and you receive a waterproofing certificate. Keep it with your house documents — it's useful when you sell or if a question ever comes up later.
How much does it cost to fix a failed waterproofed bathroom?
Every job is different, and we quote after an inspection. For context, the Cairns Bathroom Report 2026 notes that residential bathroom claims finalised under the Queensland Home Warranty Scheme in 2024–25 averaged almost $25,000 to fix. Our full bathroom renovations start from $25,000 — see the cost guide.
Ready to renovate? Call John on 07 4082 7683 or get your free quote below.